Product Details:
Payment & Shipping Terms:
|
Product Name: | Street Light Poles | Height: | 6M To 15M |
---|---|---|---|
Light Type: | LED Or HPS | Arm Type: | Single Or Double Arm |
Wall Thickness: | 2.5mm To 20mm | Pole Shape: | Round,octagonal |
Average Gavanzation Thickness: | According To The Pole Thickness | ||
High Light: | street lighting poles,galvanized street light pole |
10M Blue Color Square Light Street Light Poles with 4mm Thickness 1.5m Light Arm for Parking Lot Lighting
Quick Details for Street Lighting Pole
Item No |
10M Blue Color Square Light Street Light Poles with 4mm Thickness 1.5m Light Arm for Parking Lot Lighting |
Height |
10M |
Thickness |
4MM |
Shape |
Conical,round,octagonal, dodecagon |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 Q460, minimum yield strength>=460n/mm2 |
Wind Design |
35 m/s |
Suit for |
Parkign Lot Area Lighting |
DESIGN
1. Standard:Poles are designed according to “ Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals “ .
2. Design Wind:Design wind speed is 35m/s or as per the customer request multiplied by safety factor of 1.0-1.8 (Gust speed is 126 Km/ hr or as specified in the project specifications)
3. Design computer software:Design of poles is performed utilizing Computer software to analyse the pole shaft, base plate and anchor bolts.
MATERIAL
Material used to fabricate the pole components will be in accordance of international standards and as per the project specifications.
Main Material is Q235,Q345,Gr65 or as specified in the customer specification.
FINISHING
Shaft, Base plate, Arm Bracket and other accessories are hot dip galvanized according to BS EN 1461 and its recent revisions, the minimum average coating thickness is according to BS EN 1461, or as per the customer requirements, but not more than 70 microns average.
No welding, cutting or drilling is done after galvanizing.
The anchor bolts including nuts and washers are rough black or hot dip galvanised according to ASTM A 123 as per customized requirement.
SHAPE
1.Height:The street lighting Poles of heights from 4m up to 20m covering almost all of the outdoor street lighting requirements, are usually made out of tapered steel shafts with octagonal or conical shape, with dimensions complying with the design structural analysis, international standards requirements, and as per customer requirements.
2.Pole Sections: Only poles with heights up to 12 meters are made from one shaft segment. Poles up to 20m in height are made from two segments with minimum overlap length of 1.5 times the diameter of bottom of the upper segment.
3.Shafts: Shafts are made from steel sheet folded to the required shape and welded longitudinally by automatic arc welding machine.
4.Base Plate: Base plate is square in shape with slotted holes suitable for anchor bolts. Base plate is welded to the bottom of the shaft by double fillet weld, according to International standards.
5.Brackets: The brackets to carry the light fittings are in shape and dimensions complying with the customer requirements and the specifications of the light fittings. Shaft top is equipped with nuts welded to the shaft as shown on our drawings.
6.Anchor Bolt: Anchor bolts to fix the base plate to the concrete foundation are supplied with the required nuts and washers as per the structural analysis.
7:Service Door: Door opening size and location is as per the customer requirements and its complying with the dimensions of the cut-out. Door opening is reinforced to maintain shaft strength.
8.Lamp:LED light is available or specified in the customer requirement.
Company:
Jiangsu Milky Way specialize in offering a wide range of Octagonal Poles that is used in street light poles. These poles are fabricated using high grade raw material like steel Q235 and latest technology as per the international quality standards. Moreover, these are available in customized options to suit the varied requirements of the clients.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanization electrical power pole for over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv