Product Details:
Payment & Shipping Terms:
|
Height: | 7 M | Shape: | Conical |
---|---|---|---|
Minimum Yield Strength: | 460mpa | Usage: | Low Voltage Electric Power Transmission |
Thickness: | 2.75mm | Galvanization Standard: | ASTM A 123 |
Highlight: | metal light pole,commercial light poles |
Multiside 7M Steel Tubular Pole Q345 material 2.75mm steel plate for low voltage electric power transmission
Options & Accessories
Cross arms
Load rings
Stand-off insulator brackets
Climbing rungs, stiles and ladders
Rest platforms
Other items fabricated to the pole as required
De-Glare dull galvanised finish
Technical Data Sheet
series | Outside Diametar | Wall Thicness |
mm | Min. | mm /SWG |
15 L | 21.3 | 2 |
M | 2.6 | |
H | 3.2 | |
20 L | 26.9 | 2.3 |
M | 2.6 | |
H | 3.2 | |
25 L | 33.7 | 2.6 |
M | 3.2 | |
H | 4 | |
32 L | 42.4 | 2.6 |
M | 3.2 | |
H | 4 |
Pole Design
Standard Accessory
-Top plate
-Base plate
-Bottom strip
-Standard hole
-Climbing rung
-Anchor bolt
-Bitumen protection
-Painted marking
-Removable ladder
Available Foundation Types
Direct Embedment
Anchor Bolt/Base Plate
Vibratory Steel Caisson
Here are some reasons why they made the switch from the wooden pole to Steel Utility Pole:
Fabricated with uniform dimensions
Easy to install
Durable
Easy to maintain
Lower in life cycle costs
A solution to EPA regulations and deforestation issues
Superior in strength
Impervious to insects and rot
Free of toxic chemical treatments or hazardous waste concerns
100% recyclable
Tapered Tubular Substation Structures
Steel Substation Structures
Custom Substation Designs
Closed Section Tubes
I-Beam Structures
Lattice Structures
Steel Structures with Higher Translational Stiffness
More Pictures
Options:
• The Power Distribution Pole is available in various length, diameters and hole arrangements.
• Multisided or Tapered round variations.
• The Power Distribution Pole covers Voltage between 10-220KV.
• The Power Distribution Pole includes: suspension pole, stain pole and angle pole in different forms.
• Standard Corrosion Protection: hot dip galvanising (above and in-ground)
• Additional in-ground protection is available for special circumstances (soil condition). For example: Epoxy Coating.
• Pre-drilling for removable safety steps is available.
• Cross arms available.
Workshop
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanization electrical power pole for over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv