Product Details:
Payment & Shipping Terms:
|
| Product Name: | Steel Electric Power Pole | Application: | Power Transmission |
|---|---|---|---|
| Galvanization Standard: | ASTM A 123 | Color: | Silver |
| Maintain: | Easy Maintain | Cost: | Lower Cost |
| Material: | Hot Rolled Steel | ||
| High Light: | steel power pole,transmission line poles |
||
Q345 HDG Low Voltage Electric Power Poles 32M 20KN with Cross Arms
Description:
Standard Accessory
-Top plate
-Base plate
-Bottom strip
-Standard hole
-Climbing rung
-Anchor bolt
-Bitumen protection
-Painted marking
-Removable ladder
These are the standard accessories of the electric pole.
Specification:
|
Height |
From 9 meter to 100 meter |
|
Suit for |
Electric Power Transmission and Distribution |
|
Shape |
Polygonal or Conical |
|
Material |
Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
|
Power Capacity |
10kV to 220kV |
|
Tolerance of the dimension |
According to client’s requirement. |
|
Surface treatment |
Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
|
Joint of Poles |
Slip joint, flanged connected |
|
Standard |
ISO 9001:2008 |
|
Length of per section |
Within 14 meter once forming |
|
Welding Standard |
AWS (American Welding Society ) D 1.1 |
|
Thickness |
1 mm to 36mm |
|
Production Process |
Raw material test → Cutting →bending →Welding (longitudinal )→ Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting → Recalibration →Packages |
|
Packages |
Packing with plastic paper or according to client’s request. |
Steel
The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.
Galvanization
Standard:NFA91121
Average thickness of the galvanization:Not less than 86μm.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanization electrical power pole for over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv
