Payment & Shipping Terms:
|Item Name:||Traffic Signal Light Pole||Application:||Traffic Mast Arm Pole|
|Arm Type:||Single Arm,Double Arm||Traffic Light:||Customized|
|Surface Treatment:||Galvanization||Pole Shape:||Conical Or Polygonal|
|Average Gavanzation Thickness:||According To The Pole Thickness|
driveway light poles,
highway light pole
6.5m Height 3mm Thickness Single Arm Traffic Light Pole with Galvanization
Quick Details for Traffic Light Pole
6.8M Traffic Light Pole
According to the customer's design
Design Wind Speed – 35m/sec (126km/hr)
Pole Design – BS 5649
Galvanizing – BS EN ISO 1461:1999 (BS 729)
Welding – BS 5135
ISO 9001:2008 Accredited
Stiffener Reinforce Door
Flush Service Door
Available in Single and Double Slot Hinge
Available in Planted and Flange type
Up Lift mounting from 0 degree to 12 degrees
Extension Arm available from 3.5 meters to 5.5 meters
Customized heights available upon requested
Material used to fabricate the pole components will be in accordance of international standards and as per the project specifications.
Main Material is Q235,Q345,Gr65 or as specified in the customer specification.
Shaft, Base plate, Arm Bracket and other accessories are hot dip galvanized according to BS EN 1461 and its recent revisions, the minimum average coating thickness is according to BS EN 1461, or as per the customer requirements, but not more than 70 microns average.
No welding, cutting or drilling is done after galvanizing.
The anchor bolts including nuts and washers are rough black or hot dip galvanised according to ASTM A 123 as per customized requirement.
1. Height:The street lighting Poles of heights from 4m up to 20m covering almost all of the outdoor street lighting requirements, are usually made out of tapered steel shafts with octagonal or conical shape, with dimensions complying with the design structural analysis, international standards requirements, and as per customer requirements.
2. Pole Sections: Only poles with heights up to 12 meters are made from one shaft segment. Poles up to 20m in height are made from two segments with minimum overlap length of 1.5 times the diameter of bottom of the upper segment.
3. Shafts: Shafts are made from steel sheet folded to the required shape and welded longitudinally by automatic arc welding machine.
4.Base Plate: Base plate is square in shape with slotted holes suitable for anchor bolts. Base plate is welded to the bottom of the shaft by double fillet weld, according to International standards.
5. Brackets: The brackets to carry the light fittings are in shape and dimensions complying with the customer requirements and the specifications of the light fittings. Shaft top is equipped with nuts welded to the shaft as shown on our drawings.
6. Anchor Bolt: Anchor bolts to fix the base plate to the concrete foundation are supplied with the required nuts and washers as per the structural analysis.
7: Service Door: Door opening size and location is as per the customer requirements and its complying with the dimensions of the cut-out. Door opening is reinforced to maintain shaft strength.
8. Lamp:LED light is available or specified in the customer requirement.
Jiangsu Milky Way have extensive experience engineering and producing poles with mast arms up to 85’ in length.
For instance, we have developed special hinged flange plates to allow the mast arms to swing to the side — accommodating the large balloons and floats used in street parades.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanization electrical power pole for over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv