All Categories
electrical power poles
2250 Items Found
Power Distribution Tubular Galvanized Steel Pole With Electrical Accessories
Tubular Galvanized Steel Pole With Electrical Accessories For Power Distribution Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height:
Electrical Hot Dip Galvanized Steel Pole , Anticorrosive Power Line Pole
Electrical Hot Dip Galvanized Steel Pole , Anticorrosive Power Line Pole Specification Painting Color: Hot dip galvanizing color Finishing 1: Black pole, Rough pole Finishing 2: Hot dip Galvanizing antirust. Temperature range -35 C~+45 C Max wind velocity Aganist wind pressure of 160Km/h Base plate mounted Base plate is square, octagonal or round in shape with slotted holes for anchor bolt and dimension as per customers requirement. Ground mounted The length buried
1250 Dan Electric Line 12m Galvanised Pole
12m - 1250dan Electricity Pole Galvanized Steel Pole For Electric Line Description: Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines
10m Class 2 69 Kv Transmission Power Line Pole
Descripition of material: 1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion treatment 2. Light plate frame is made by high-quality stainless steel 3. Fastened bolts and nuts of stainless steel Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36
69kv Steel Utility Poles , Hot Dip Galvanized Power Distribution Pole
Specification Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole Marks Nane palte through rivert or glue ,engrave ,emboss as per customer requirement Joint of Poles Insert mode,innerflange
25ft 30ft 35ft 40ft Tubular Pole For Electrical Industry
25ft 30ft 35ft 40ft Hot Dip Galvanized Steel Tubular Pole For Electrical Industry Product Introduction 1.Material :Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- 2.Torlance of the diensmtion: +- 2% 3.Electroshock resistant protective grade :Grade 4.The casing anti-corrosion performance :Class 5.Surface treatment: Hot dip galvanized Following
Q345 Galvanized Steel Pole Conical Power Transmission Electric Tubular Tower
High Quality Q345 Steel Conical Power Transmission Electric Steel Tubular Tower Pole Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per
90ft Q460 Electrical Transmission Galvanized Steel Pole 160km / H 30m / S Wind Speed
90FT Q460 Electrical Transmission Galvanized Steel Pole 160km / H 30m / S Wind Speed Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagona
12M 16KN Steel Tubular Electric Pole For Electrical Distribution Line Transmission Project
12M 16KN Power steel pipe tubular poles For Electrical Distribution Line Transmission Project Production Process Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles. The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality check before galvanized,
