Q345 / Q235 69 kv Single Circuit Electrical Power Pole With Cross Arm Parts

Key Specifiction:

1. Material: Q235, Q345 or SS400 high quality Hot rolled steel or any special request is available.

2. Mounting Height:  3-20M Optional Mounting Height

3. Shape: Round conical; Octagonal conical; Straight Square; Polygonal; Tapered round

Shafts are made of steel sheet that folded into required shape and welded longitudinally by automatic arc welding machine

4. Brackets: Single or double brackets are in the shape and dimension as per customers requirement

5. Base plate: Base plate is square or round and size as customers' requirement

6. Base plate mounted: Base plate is square or round in shape with slotted holes for anchor bolt and dimension as per customers requirement

7. Ground mounted: The length buried underground as per customers requirement

8. Anticorrosion methods: Hot dip galvanized steel or hot dip galvanized with Plastic Powder Coating.

9. Galvanizing: Hot dip galvanization with thickness of 80-100µm average

10. Powder coating: Pure polyester powder painting, color is optional

11. Other features: Short construction cycle, less land occupation, low overall cost and easy maintenance

12. Welding: Welding confirms with international welding standard of CWB

13. Certificate:  ISO9001-2000 

14. We don't have standard products, so we need customer's drawings and request.

Our Company:

Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on
We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on

Lofting and design software :We have transmisson power pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly

Inspection

To assure our products qualified ,we take steps as follows :

1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .

2.Introducing ISO management ,We are awared ISO 9001:2008 certificate . .

3.QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore every shipment

Manufacture Procedure

Raw material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages

As an BV ,ISO , approved supplier in China ,we have more than 20 years produce and export steel pole ,and we can assure the pole we offered is of sound quality which made from qualified material with our professional workers and advance equipment .

Packing And Shipping

Material

All of our material are purchased from famous mill factory to assure the quality

1. A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
2. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.