Product Details:
Payment & Shipping Terms:
|
| Type: | Straight Pole, Tensile Pole, Turn Pole | Power: | 10kv~550kv |
|---|---|---|---|
| Standard: | ISO9001 | Wind Speed: | 160km/h, 30m/s |
| Tolerance: | +/-2% | Material: | As Per Customer Request |
| Highlight: | galvanised steel poles,power line pole |
||
Water Proof Welded Galvanized Steel Pole For Electrical Distribution Line
Scope of Application:
The product is mainly use in small power transmission line, which suitable for Small whole, ceiling-mounted steel pole tower installation transmission line project; Generally it only applies to erect on the flat terrain such as plain and side of the road, and much rely on heavy lifting machines for installation.
Straight pole is mainly use to the “straight” part of the power line, it usually only bear with the weight of the wire, the endured wire icing and wind pressure.
Tension pole is mainly use in Load-bearing towers; it would be set between few Straight towers. Since the power line discounted and tower collapsed, it would limit the fault segment between the two Tension towers in the case of tension imbalance on both sides, which ease of construction, maintenance.
Angle pole is mainly installed in the around corner of the power line, so the structure of it has to consider the requirement of undertake imbalance tension; According to the angle degree and strength of tower design, straight line angle tower is mainly use in the small degree corner of the power line, and Tension Angle Tower is mainly used for larger degree corner of the power line.
Terminal pole is mainly use in the beginning or end of the power transmission line, it usually set as the first tower of extension line of substation; because it could undertake great imbalance tension, so sometime it also use in the large degree of power line corner.
Specification
|
Power Capacity |
10kV to 220kV |
|
Tolerance of the dimension |
According to client’s requirement. |
|
Surface treatment |
Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
|
Joint of Poles |
Slip joint, flanged connected |
|
Standard |
ISO 9001:2008 , CE |
|
Length of per section |
Within 15 meter once forming |
|
Welding Standard |
AWS (American Welding Society ) D 1.1 |
|
Thickness |
1 mm to 40mm |
|
Production Process |
Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
|
Packages |
Packing with plastic bubble paper and blanket or according to client’s request. |
Terms & Conditions
1. Price Term: EXW, FOB, CFR or CIF Shanghai Port
2. MOQ: 1 sets.
3. Payment: 30% by T/T as deposit and balance by T/T or L/C at sight before shipment. Other payment way is negotiable.
4. Package: plastic bubble paper and blanket or according to client’s requirement.
5. Delivery: for 30 sets, goods can be ready for shipment within 20 workdays after receiving deposit.
6. Parts Design Service Period: 20 years.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanization electrical power pole for over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv
