Jiangsu milky way steel poles co.,ltd

Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .

Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on

We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on

To assure our products qualified ,we take steps as follows :

1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .

2. Introducing ISO manag...

Equipment:

一．Bending machine

model: WC67Y-1600T15000

1.Our company has international advanced large CNC bending equipment: a bending length up to 15 m, a

bending thickness up to 30MM, the maximum processing rod diameter up to 3500MM.

二．Laser cutting

model: QY-LCF-1325 Cutting thickness up to 25MM

1.High precision：Cutting accuracy is less than 0.05mm.

2.Narrow kerf：Kerf width of 0.10 ~ 0.20mm.

3.Smooth cutting surface: Burr-free cutting surface, general control cut surface roughness within the Ra12.5.

4.Fast speed: Cutting speeds up to 10m / min, the maximum positioning speed up to 70m / min.

5.High cutting quality: There is no thermal deformation of workpiece.

三．Welding

1.The company has a number of Panasonic Matsushita automatic gas shielded welding and submerged arc

welding equipment, h...

Material:

All of our material are purchased from famous mill factory to assure the quality.

1.A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .

2.Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.

Inspection:

To assure our products qualified ,we take steps as follows :

1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .

2.Introducing ISO management ,We are awared ISO 9001:2008 certificate.

3.QC Inpection:It is our company policy that all the finis...