132KV Q345 Material 4mm Electric Power Pole 3 Sections with Climbing Rung
132KV Q345 Material 4mm Electric Power Pole 3 Sections with Climbing Rung Specifications: Design of pole Against earthquake of 8 grade Minimum yield strength 355 mpa Minimum ultimate tensile strength 490 mpa Max ultimate tensile strength 620 mpa Length of per section Within 14m once forming without slip joint Welding We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1
3.5mm Q345 Material Electric Power Pole 2 Sections with Climbing Rung
3.5mm Q345 Material Electric Power Pole 2 Sections with Climbing Rung Specifications: Shape Conoid ,Multi-pyramidal,Columniform,polygonal Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Joint of Poles Insert mode,inner flange mode,face to face joint mode
Q345 Material 3mm Electric Power Pole 2 Sections for 110KV Power Transmission
Q345 Material 3mm Electric Power Pole 2 Sections for 110KV Power Transmission Parameter: 1.Type: Straight Pole, Tensile Pole, Turn Pole 2.Max length per section: 14 m 3.Thickness: 2.5mm ~ 30 mm 4.Shape: Conical or polygongal tapered 5.Material: Q235B/A36/A283 M Gr.C / SS400/S235 JR / St 37-2 / Fe 360 Q345B/A572 M Gr. 50/S355 JR / ST 52-3/Fe 510 Q390/A633 M Gr.50/St E380 Q460/A572 M.Gr.65 6.Power: 10 KV ~ 550 KV 7.Finish: hot dipgalvanization, blasting, powder coating,
8M 5KN Gr65 Material 3mm Electric Power Pole for 110KV Power Transmission
8M 5KN Gr65 Material 3mm Electric Power Pole for 110KV Power Transmission Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Galvanization Standard:NFA91121 Average thickness of the galvanization:Not less than 70μm. Manufacture Tolerance -Component Length:-25mm to
11.8M 20KN Gr65 Material 4mm Electric Power Pole for 69KV Power Transmission
11.8M 20KN Gr65 Material 4mm Electric Power Pole for 69KV Power Transmission Galvanization Standard:NFA91121 Average thickness of the galvanization:Not less than 70μm. Manufacture Tolerance -Component Length:-25mm to 75mm -Straightness:2mm/m -Twisting degree:1per 3 meters length -Ovalisation:Maximum is 3% -The average diameter:+/-0.5% -Slip length:+/-150mm Specifications: Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue
65FT Gr65 Material 6mm Electric Power Pole 3 Sections with climbing Rungs
65FT Gr65 Material 6mm Electric Power Pole 3 Sections with climbing Rungs Specifications: Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required Joint of
ss
s
ss
s
132KV hot galvanization electrical power pole for electrical line
132KV hot galvanization electrical power pole for electrical line Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal , Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Tolerance of dimension +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor
