Single Side Lighting 35M HDG High Mast Park Light Pole with 6 Lamps

Airport ,seaport,plaza,stadium ,square,highway,
street way etc

Usually Q345B/A572,minimum yield strength>=345n/mm2
              Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, 
SS490, to ST52-

Various figure of slection ,material with hot dip galvanization steel 
frame ,stainless steel ,special aluminum plate

Projector generally to be applied with safety grade IP65 
Luminaire with high pressure sodium lamp of long lift and 
high lighting efficiency ,or metal halide lamp with high CRI

Lifter fixed in the inner of the pole with lifting speed of 3~5 
meter per minute Euqiped e;ectromagnetism brake and break –proof 
device,manual opeation applied under power cut

Electric appliance box to be be the holde of the pole ,lifting operation 
could be 5 meter away from the pole through wire 
Time control and light control could be equipped to realize full-load 
lighting mode and part lighitng mode

Hot dip galvanized Following ASTM A 123, 
color polyester power or any other standard by client required.

We has past flaw testing.Internal and external double welding makes 
the welding beautiful in shape 
Welding Standard :AWS ( American Welding Society ) D 1.1

Rew material test → Cuttingj →Molding or bending →
Welidng (longitudinal )→Dimension verify →Flange welding
→Hole drilling →Calibration → Deburr→Galvanization or 
powder coating ,painting →Recalibration →Thread →Packages

Our poles as normal cover by Mat or straw bale at the top and bottom ,
anyway also can following by client required , each 40HC or OT can 
loading how many pcs will calculation base on the client actually 
specification and data.

Aerial clog could be installed complied with clients desire to carry 
camera or industrial antenna