| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | 69kv Electrical Line |
| Shape | Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Shape | Conoid ,Multi-pyramidal,Columniform,polygonal Or Conical |
|---|---|
| Design Load In Kg | 300~1000kg Applicated To 50cm From The Top |
| Thickness | 1mm To 30mm |
| Surface Treatment | Hot Dip Galvanization |
| Suit For | Electricity Distribution |
| Type | Steel Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Steel Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Material | Yield Strength Not Less Than 345mpa |
|---|---|
| Surface | Galvanization.average Coating Not Less Than 80um |
| Life Time | 50 Years |
| Torelance Of Dimenstion | +- 2% |
| Design Of Pole | Against Earthquake Of 8 Grade |
| Shape | Conoid ,Multi-pyramidal,Columniform,polygonal Or Conical |
|---|---|
| Design Load In Kg | 300~1000kg Applicated To 50cm From The Top |
| Thickness | 1mm To 30mm |
| Surface Treatment | Hot Dip Galvanization |
| Suit For | Electricity Distribution |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Power | 10kv~550kv |
|---|---|
| Design Load In Kg | 300~1000kg Applicated To 50cm From The Top |
| Thickness | 1mm To 30mm |
| Surface Treatment | Hot Dip Galvanization |
| Suit For | Electricity Distribution |