| Type | Steel Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| MATERIAL | S355JR |
|---|---|
| APPLICATION | Electricity Distribution |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| MATERIAL | S355JR |
|---|---|
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| MATERIAL | S355JR |
|---|---|
| APPLICATION | Electricity Distribution |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| MATERIAL | Yield Strength Not Less Than 345mpa |
|---|---|
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |