| Name | Single Circuit 69kv Galvanized Steel Commercial Light Poles 400mm Length Bitumen |
|---|---|
| Height | 20-100ft |
| Thickenss | 2.5mm 3mm 4mm 5mm |
| Design Load | 500-2000kg |
| Port | Always Shanghai |
| Material | Yield Strength Not Less Than 235mpa/345mpa |
|---|---|
| Warrenty | 15 Years |
| Lifetime | 50 Years |
| Welding | Aws D1.1,penetration Rate 100% |
| Surface Treatment | Hot Dip Galvanization,average Coating 85um |
| Type | 12m Utility Pole With Conical, Round, Or Polygonal Shape For Power Distribution |
|---|---|
| Shape | Round,Conical |
| Payment Terms | T/T,L/C |
| Thickness | 2.5mm-16mm |
| Surface Finished | Hot Dip Galvanized |
| Type | Galvanized Metal Poles 12m Utility Pole For Power Distribution Equipment |
|---|---|
| Shape | Round,Conical |
| Payment Terms | T/T,L/C |
| Thickness | 2.5mm-16mm |
| Surface Finished | Hot Dip Galvanized |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Surface Treatment | Hot Dip Galvanized |
| Thickness | 1mm To 30mm |
| Optical Assembly Of Lighting Fixture | IP 65 |
| Torelance Of Dimenstion | +- 2% |
| Type | Galvanized Steel Poles 12m Utility Pole For Power Distribution Equipment |
|---|---|
| Shape | Round,Conical |
| Payment Terms | T/T,L/C |
| Thickness | 2.5mm-16mm |
| Surface Finished | Hot Dip Galvanized |
| Material | Q235 Q345 GR65 SS400 |
|---|---|
| Wind Speed | 35m/s |
| Origin Of Place | Yixing |
| Color | Customs' Requirement |
| Surface Treament | Hot Dip Galvanization |
| Material | Q345, Q235 |
|---|---|
| Design Load In Kg | 300~ 1000 Kg Appliced To 50cm From The To Pole |
| Torlance Of Dimenstion | +- 2% |
| Suit For | Electricity Distribution |
| Welding Standard | AWS D 1.1 |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |