| Surface Treatment | Hot Dip Galvanized |
|---|---|
| Type | Straight Pole, Tensile Pole, Turn Pole |
| Thickness | 1mm To 30mm |
| Power | 10kv~550kv |
| Suit For | Electricity Distribution |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Surface Treatment | Hot Dip Galvanized |
| Thickness | 1mm To 30mm |
| Optical Assembly Of Lighting Fixture | IP 65 |
| Torelance Of Dimenstion | +- 2% |
| Material | Yield Strength Not Less Than 235mpa/345mpa |
|---|---|
| Warrenty | 15 Years |
| Lifetime | 50 Years |
| Welding | Aws D1.1,penetration Rate 100% |
| Surface Treatment | Hot Dip Galvanization,average Coating 85um |
| Type | 45FT 50FT HT Type NGCP Utility Pole For Thr Philippines Approved Supplier |
|---|---|
| Style | Galvanization |
| Wind Speed | 160km/h, 30m/s |
| Torlance Of Dimenstion | +- 2% |
| Suit For | Electricity Distribution |
| Name | The Philippines NGCP Hot Dip Galvanized Utility Power Electrical Transmission Poles With Accessories |
|---|---|
| Design | The Philippines NGCP |
| Height | 45FT -90FT |
| Thickenss | 3-20mm |
| Port | Always Shanghai |
| MATERIAL | Yield Strength Not Less Than 345mpa |
|---|---|
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| MATERIAL | Yield Strength Not Less Than 345mpa |
|---|---|
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| Product Name | Steel Utility Pole |
|---|---|
| Application | Tranmission Line |
| Design | Customized |
| Surface Treatment | Hot Dip Galvanization |
| Welding Standard | AWS D1.1 |
| Material | Yield Strength Not Less Than 235mpa/345mpa |
|---|---|
| Warrenty | 15 Years |
| Lifetime | 50 Years |
| Welding | Aws D1.1,penetration Rate 100% |
| Surface Treatment | Hot Dip Galvanization,average Coating 85um |
| Type | Straight Pole, Tensile Pole, Turn Pole |
|---|---|
| Suit For | Electricity Distribution |
| Shape | Conoid, Multi-pyramidal, Columniform, Polygonal Or Conical |
| Welding Standard | AWS D1.1 |
| Tolerance | +/-2% |