| Tolerance Of Dimension | +- 2% |
|---|---|
| Wind Resistance | 3-500km/h |
| Material | GR50 GR65 S500 S355 |
| Height | 69KV 16m |
| Welding | Welding Confirms With International Welding Standard Of CWB |
| Material | Steel,GR65,With Miminum Yield Strength 460mpa |
|---|---|
| Color | Customised |
| Surface Treatment | Hot Hip Galvanization |
| Galvanization Standard | ASTMA123 |
| Warranty | 15years |
| Material | Gr.65 |
|---|---|
| Surface Treatment | Hot Hip Galvanization |
| Galvanization Standard | ASTMA123 |
| Welding Standard | AWS D.1.1 |
| Height | 13m |
| Material | Gr.65 |
|---|---|
| Surface Treatment | Hot Hip Galvanization |
| Galvanization Standard | ASTMA123 |
| Welding Standard | AWS D.1.1 |
| Shape | 8side |
| Rated Current | 220KV |
|---|---|
| Rated Voltage | 10kv-138kv |
| Material | Gr.65 |
| Surface Treatment | Hot Hip Galvanization |
| Galvanization Standard | ASTMA123 |
| Length | 12m |
|---|---|
| Load Capacity | 850Dan |
| Safety Factor | 1.0 |
| Rated Current | 220KV |
| Rated Voltage | 69KV |
| MATERIAL | S355JR |
|---|---|
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| Height | 90FT 100FT |
|---|---|
| Power | 10-550kv |
| Market | Philppines,Africa |
| Thickness | 1-30mm |
| Material | Yield Strength Not Less Than 345mpa 460mpa |
| MATERIAL | S355JR |
|---|---|
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average Coationg Not Less Than 85um |
| Height | 6-30m |
|---|---|
| Power | 10-550kv |
| Market | Philppines,Africa |
| Thickness | 1-30mm |
| Material | Yield Strength Not Less Than 345mpa 460mpa |