| Material | GR65 |
|---|---|
| Origin Of Place | Yixing |
| Type | Burial |
| Surface Treament | Hot Dip Galvanization |
| Galvanization Standard | ASTM A123 |
| Type | Steel Tubular Pole |
|---|---|
| Surface Treatment | Hot Dip Galvanized |
| Design Load In Kg | 300~1000kg |
| Wind Speed | 160km/h |
| Suit For | Electricity Distribution |
| Type | Steel Tubular Pole |
|---|---|
| Surface Treatment | Hot Dip Galvanized |
| Design Load In Kg | 300~1000kg |
| Wind Speed | 160km/h |
| Suit For | Electricity Distribution |
| Product Name | Steel Utility Pole |
|---|---|
| Application | 69KV Electrical Power Distribution |
| Quality Control | ISO 9001-2008 |
| Welding Standard | AWS D 1.1 |
| Surface Treatment | HDG |
| Height | 18 M |
|---|---|
| Voltage | 132 KV |
| Minimum Yield Strength | 345 Mpa Or 460mpa |
| Load | 12.5 KN |
| Thickness | 4mm Wall Thickness |
| Product Name | Steel Utility Pole |
|---|---|
| Application | Electrical Power Distribution |
| Quality Control | ISO 9001 |
| Welding Standard | AWS (American Welding Society ) D 1.1 |
| Surface Treatment | Hot Dip Galvanization |
| Product Name | Steel Electric Power Poles |
|---|---|
| Application | Power Distribution |
| Surface Treatment | Galvanization Powder Coating |
| Welding Standard | AWS D 1.1 |
| Galvanization Standard | ASTM A 123 |
| Product Name | Steel Tubular Pole |
|---|---|
| Welding Standard | AWSD 1.1 |
| Material | Q235 |
| Flange Size | 450mm |
| Wall Thickness | 3mm |
| Product Name | Steel Tubular Pole |
|---|---|
| Max Ultimate Tensile Strength | 620 Mpa |
| Material | Q235 |
| Length Of Per Section | Within 14m Once Forming Without Slip Joint |
| Wall Thickness | 3mm |
| Product Name | Steel Power Pole |
|---|---|
| Application | Power Distribution |
| Material | Gr65 |
| Minimum Yield Strength | 460 Mpa |
| Max Ultimate Tensile Strength | 620 Mpa |